FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister   ProfileProfile    Log inLog in   RSS Feed

Google HTC Nexus One

 
Post new topic   Reply to topic    Salling Software Forums Forum Index -> Salling Media Sync for Mac
View previous topic :: View next topic  

Helpful?
Yes
100%
 100%  [ 2 ]
No
0%
 0%  [ 0 ]
Total Votes : 2

Author Message
GloobyBoolga
Newbie


Joined: 15 Dec 2009
Posts: 1

PostPosted: Tue Dec 15, 2009 12:14 pm    Post subject: Google HTC Nexus One Reply with quote

Adding this to the "Android Device" section of a transportConfig file worked for me.

[code:1] <dict>
<key>vid</key>
<integer>19985</integer> <!-- 4e11 -->
<key>pid</key>
<integer>6353</integer> <!-- 18d1 --> <!-- HTC Nexus One -->
</dict>
[/code:1]

Based on the following info from the System Profiler:

Capacity: 14.84 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x4e11
Vendor ID: 0x18d1
Version: 1.00
Serial Number: HT9C3P803622
Speed: Up to 480 Mb/sec
Manufacturer: Google, Inc.
Location ID: 0x24700000
Current Available (mA): 500
Current Required (mA): 256
Mac OS 9 Drivers: No
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Not Supported
Volumes:
G1SDCARD:
Capacity: 14.84 GB
Available: 4.57 GB
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/G1SDCARD
--
jpa



Android MSC.transportConfig
 Description:
Transport config file to be dropped at the root of the USB device.

Download
 Filename:  Android MSC.transportConfig
 Filesize:  8.22 KB
 Downloaded:  695 Time(s)

Back to top
View user's profile Send private message
salling
Site Admin


Joined: 27 Jul 2004
Posts: 7498
Location: Stockholm, Sweden

PostPosted: Tue Dec 15, 2009 3:19 pm    Post subject: Reply with quote

Thank you. Building this into the product for the next release.

Best.
--
Jonas
Back to top
View user's profile Send private message Send e-mail Visit poster's website
pkulak
Newbie


Joined: 07 Dec 2009
Posts: 5

PostPosted: Tue Jan 12, 2010 11:12 pm    Post subject: Reply with quote

Could someone tell me how I can use this information to get Media Sync working with my Nexus One? I have no idea what a "transportConfig" file is. I'm on a Mac, by the way.
Back to top
View user's profile Send private message
salling
Site Admin


Joined: 27 Jul 2004
Posts: 7498
Location: Stockholm, Sweden

PostPosted: Wed Jan 13, 2010 12:23 am    Post subject: Reply with quote

Just enable the option Check for beta versions in the app Settings. Then check for updates. The latest beta supports the Nexus One.

Best.
Jonas

[quote="pkulak"]Could someone tell me how I can use this information to get Media Sync working with my Nexus One? I have no idea what a "transportConfig" file is. I'm on a Mac, by the way.[/quote]
Back to top
View user's profile Send private message Send e-mail Visit poster's website
pkulak
Newbie


Joined: 07 Dec 2009
Posts: 5

PostPosted: Wed Jan 13, 2010 12:46 am    Post subject: Reply with quote

Awesome, thanks!
Back to top
View user's profile Send private message
qbit
Newbie


Joined: 13 Jan 2010
Posts: 3

PostPosted: Wed Jan 13, 2010 10:13 pm    Post subject: Reply with quote

Enabled beta, updated and restarted the app... Finder is able to see my n1. But mediasync doesn't.. nothing in the log..

Any suggestions?

RESOLVED: Turns out if you have debug mode enabled ... MediaSync wont see it.

[quote="salling"]Just enable the option Check for beta versions in the app Settings. Then check for updates. The latest beta supports the Nexus One.

Best.
Jonas

[quote="pkulak"]Could someone tell me how I can use this information to get Media Sync working with my Nexus One? I have no idea what a "transportConfig" file is. I'm on a Mac, by the way.[/quote][/quote]
Back to top
View user's profile Send private message Visit poster's website
salling
Site Admin


Joined: 27 Jul 2004
Posts: 7498
Location: Stockholm, Sweden

PostPosted: Wed Jan 13, 2010 11:22 pm    Post subject: Reply with quote

I think I've fixed debugging mode, too, for the final version of 1.1.5. Just to make sure, would you be able to find me the USB product ID in this mode? You can find this info in System Profiler (don't forget to enable debugging mode on the phone first, though).

Best.
--
Jonas

[quote="qbit"]Enabled beta, updated and restarted the app... Finder is able to see my n1. But mediasync doesn't.. nothing in the log..

Any suggestions?

RESOLVED: Turns out if you have debug mode enabled ... MediaSync wont see it.

[quote="salling"]Just enable the option Check for beta versions in the app Settings. Then check for updates. The latest beta supports the Nexus One.

Best.
Jonas

[quote="pkulak"]Could someone tell me how I can use this information to get Media Sync working with my Nexus One? I have no idea what a "transportConfig" file is. I'm on a Mac, by the way.[/quote][/quote][/quote]
Back to top
View user's profile Send private message Send e-mail Visit poster's website
qbit
Newbie


Joined: 13 Jan 2010
Posts: 3

PostPosted: Thu Jan 14, 2010 5:12 pm    Post subject: Reply with quote

Sure thing!

Product ID: 0x4e12


[quote="salling"]I think I've fixed debugging mode, too, for the final version of 1.1.5. Just to make sure, would you be able to find me the USB product ID in this mode? You can find this info in System Profiler (don't forget to enable debugging mode on the phone first, though).

Best.
--
Jonas[/quote]
Back to top
View user's profile Send private message Visit poster's website
qbit
Newbie


Joined: 13 Jan 2010
Posts: 3

PostPosted: Mon Jan 18, 2010 2:47 am    Post subject: Reply with quote

If anyone else is interested in running MediaSync with dev mode on.. add the following line below the existing nexus one line in "Android MSC.transportConfig"

[code:1]
<dict>
<key>vid</key>
<integer>6353</integer>
<key>pid</key>
<integer>19986</integer> <!-- Nexus One ( Dev Mode )-->
</dict>
[/code:1]

[quote="qbit"]Sure thing!

Product ID: 0x4e12


[quote="salling"]I think I've fixed debugging mode, too, for the final version of 1.1.5. Just to make sure, would you be able to find me the USB product ID in this mode? You can find this info in System Profiler (don't forget to enable debugging mode on the phone first, though).

Best.
--
Jonas[/quote][/quote]
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Salling Software Forums Forum Index -> Salling Media Sync for Mac All times are GMT + 2 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group